AE Thailand - Friend Club for Social Contribution

เนื่องจากได้มีโอกาสเข้าไปอ่าน web board ของ Celica Club ของเมกาเจอว่าเค้ามีการรวมกันไปจ้างบริษัที่ผลิตของแต่งรถ ทำก้านสูบแต่งของ 7AFE เมื่อต้นปี ทำให้โรงงานนี้มีไลน์การผลิตของก้านสูบแต่ง 7AFE/4AGE ท่านใดสนใจลองเข้าไปเยี่ยมชม สั่งซื้อกันนะครับ ราคาไม่แรงพอได้ครับ  homq homq

http://www.belfabracing.com/index.php?cPath=263_225_355&osCsid=545a7b1b607f4412684800e1958a16a0 (http://www.belfabracing.com/index.php?cPath=263_225_355&osCsid=545a7b1b607f4412684800e1958a16a0)

TOYOTA 7AFES Belfab Pro® H Beam Rods [PRO-5216H] $360.00
 

BELFAB PRO® H-BEAM RODS

COROLLA/CELICAS 1994 - 1999 1.8 liter engine

The rod length 132.5mm (5.216")
Big End Bore 51mm (2.008")
Pin Dia. .787"
Rod Weight 460g
Piston Bore 81mm (3.189"), Crankshaft stroke 85.5mm (3.37")

The largest A-series engine was the 1.8 L (1762 cc) 7A-FE. Produced from 1993 to 1998, it was a 4-valve DOHC narrow-valve-angle engine. Cylinder bore was 81 mm (3.19 in) and stroke was 85.5 mm (3.37 in).

The 7A-FE's most common application was in the 1993–1997 Toyota Corolla. The engine was also used in some 1994–1999 Toyota Celicas at the base ST trim level, as well as the Toyota Corolla's clone, the Geo Prizm. Since the 7A shares the same layout as the 4A it is possible to create a 7A-G(Z)E out of a 7A-FE bottom and a 4A-G(Z)E head and pistons.

Since the 7A is a very common engine the upgrade from 4A-G(Z)E to 7A-G(Z)E should be relatively cheap.

Belfab Has now added this rod to the product line, This is a great upgrade for the engine builder who are always in need of more torque.
 




TOYOTA 1.6 Later Version 4age Belfab Pro® H Beam Rods [CRS-4804] $360.00
 
BELFAB PRO® H-BEAM RODS

COROLLA/MR2 4AGE 1988-1994 1.6 liter engine

The rod length 122mm (4.800")
Big End Bore 45mm (1.772")
Pin Dia. 20.01mm (.787")
Rod Weight 460g
Piston Bore 81mm (3.189"), Cranhshaft stroke 77mm (3.03")

Our connecting rods are fully machined to guarantee the removal of all surface imperfections in the forging. After heat treatment, each connecting rod is 100% magnaflux inspected and hardness checked, then machined to final size. Each set of rods is balanced and then shot peened to achieve the ultimate in strength and fatigue properties.



Belfab Pro® H Beam Rods for import and sport compact engines are manufactured from the best aircraft quality 4340 steel Using the latest design the Belfab Pro® H Beam Rods are lightest racing rod in weight without sacrifice of any strength. Belfab Pro® H Beam Rods is forged in separate processes of rod and cap for optimum internal grain flow and structural integrity. Belfab Pro® rods are perfect for sports compact engines producing 600+ HP  

 

 homs homs

กะลังหาช่องทาง ส่งมาอยู่หงะ พี่ ..  aom3 aom3

สวยจริงน้า...ให้ส่งทาง DHL เลย

อยากได้จัง

มีประโยขน์แบบนี้ค่อยน่าอัพหน่อย homs

 homs homs

 homs homs
 homi homi

อยากได้จัง ตังค์ไม่มี aom2 aom2 aom2 aom2

 homs homs homs

 homs homs homs

สั่งมาเมื่อไร เรียกผมไปดูด้วยนะพี่ปา2

 homs

 aom6  aom6 aom6 aom6 aom6 aom6 aom6 aom6 aom6

 homs homs homs homs homs